Contents:
Common diagnostic connector locations Common diagnostic connector locations for recent Vauxhall/Opel models are listed below. For older vehicles, the diagnostic connector can often be found in the engine compartment. Astra-F 16 pin OBD connector located in the fuse compartment to the right hand side of the steering wheel on RHD vehicles and to the left hand side of the steering wheel on LHD vehicles. Covering panel can be pulled off to reveal the complete fuse compartment and diagnostic connector. Astra-G 16 pin OBD connector located in the central console between the handbrake and the gearstick. There is a plastic cover that needs to be removed to find the connector. This can be done with a medium sized flat-blade screwdriver Continue to download »
Sponsored Links
Introduction Safety Information Tools Needed Overview Hardware Components Installation Step 1 Step 2: Step 3: Step 4: Step 5: Assemble Third Brake Light Mount The Third Brake Light Route the Wires Make the Electrical Connections Install the Fuse Holder And Fuse Removing Third Brake Light Trouble Shooting Replacement parts guide Limited Warranty INTRODUCTION Thank you for purchasing a Logo Lites® LED Third Brake Light Kit. Your third brake light kit was built to high quality standards to provide you with years of reliable service. This manual should serve as a guide for installing a third brake light kit on your vehicle. Although this guide is thorough, each installation is different, so it can not cover all applications. You can install the turn signal kit yourself IF: 1. you have the right tools, 2. you have a reasonable mechanical and electrical aptitude or experience, 3. you have the knowledge or diagrams of where wiring, fuel lines, etc. are located in the vehicle, 4. and you read and follow the instructions very carefully. SAFETY INFORMATION Read 
Important Safety Instructions I. Introduction 1-1 Before Use 1-2 Specifications 1-3 Package Contents 1-4 Installation 1-5 Front panel controls 1-6 Back panel connections 1-7 Remote control 1-7-1 Inserting batteries and effective range of the remote 1-7-2 Remote Control Button Description II. Equipment Connections and Setup 2-1 Power Connection 2-2 Connecting with Headphone 2-3 Antenna Connections 2-4 Connecting Other Components 2-4-1 Connecting Composite video/S-video 2-4-2 Connecting Component video III. Basic operation and Adjustment 3-1 Turning on your LCD TV & Watching a TV program 3-2 Using the On Screen Display¡ OSD ] ¡ ^ 3-2-1 OSD Main Menu contents & OSD switch loop 3-2-2 OSD Instruction 3-2-2-1 DISPLAY 3-2-2-2 
CHYP If the vehicle has a VES (Video Entertainment System), it must be disconnected! This interface is not compatible with REF model radios. They do not White, Brown, Gray (Satellite input) DO NOT USE have a VES input available. iPod (Chp 1) 1. Remove factory radio. Remove factory female 10 10 pin pin Satellite cable, if available. Plug the CHYP’s 10 pin SAT plug into the radio. Plug the factory SatelOutput lite cable that was just removed into the CHYP’s 10 Purple, Black, Green (VES input) pin connector. 2. Insert the CHYP’s 22 pin main power Plug (T-HarChrysler iPod & Auxiliary Audio Input 22 pin ness) in between the factory radio and factory Auxiliary 2 audio input harness. (Chp 2) 3. If the vehicle has both factory Satellite and 
