Contents:
Section I : Installing the PhatBox Mounting the PhatBox When choosing a mounting location remember: Leave at least 3 inches of clearance for inserting the cable. The PhatBox should be mounted parallel or perpendicular to the floor of the car. Don’t mount near wiring or fuel lines. Leave the front of the PhatBox unobstructed for easy insertion of and removal of the cartridge. The unit should be mounted to a hard stable surface, such as particle board or sheet metal. 7. The red and green lights should turn on. Red (Power) Green (Activity) 8. Approximately 5 seconds later, both lights should be off and stay off. 9. Turn on your stereo (usually by turning the key to ACC). 10. Switch to CD changer mode on your stereo. This is done by pressing the CD button (If you have a CD in your car stereo you may have to press the CD button twice). 11. Wait up to 15 seconds for a Continue to download »
Sponsored Links
Although this package is designed to allow you to convert a carbureted engine to fuel injection or allow you better control over your present fuel injected engine, it does not include the hydraulic portion of the installation. If you need a fuel pump, filter, fittings, etc. contact your local ACCEL EMIC center for the proper ACCEL DFI part numbers for your application. I. OBTAINING YOUR MANIFOLD Currently ACCEL DFI only has manifolds for Chevrolet applications, for your Ford application you may use an OEM or aftermarket fuel injection manifold. Talk to some of our ACCEL DFI’s EMIC centers for fabricating or modifying a carbureted style manifold for your application. ACCEL DFI EMIC Centers can also sell, install, and tune all ACCEL DFI products. For the nearest dealer to you please call: 1.800.992.2235. II. SETTING UP YOUR MANIFOLD Prior to installing your manifold make sure that all gasket surfaces are clean. ACCEL recommends 
